Refrigerator Gasket change Tips And Procedures

One of the trickiest maintenance problems you might encounter with your refrigerator in the future is the replacement of the gasket. It is tricky because the gasket is connected to two parts of the refrigerator. You might want to ask man to help you hold the door while you take off the screws.

Step 1: You have to find the right gasket replacement first. Check the official website of the constructor of your fridge. They ordinarily offer parts. If you can't find the part you are looking for, you can look from appliance shop or hardware shop for the parts that you need. Make sure it has the right fit. You should know what type of fridge you are using. There are dissimilar gasket sizes for French-door refrigerators, in depth-fridge, bottom freezer refrigerator and so on.

3 Inch French Door Refrigerator

Step 2: The new gasket ordinarily feels tough and un-bendable at first. To make it more elastic, you can soak it in hot water. This will make the material pliable. Soak it in hot water for at 15 minutes until the material becomes easier to use.

Step 3: take off all the contents of your fridge. Set aside the perishable goods or place them inside a cooler filled with ice. Unplug the fridge and slowly pull it away from the kitchen wall.

Step 4: Get a screwdriver that can take off the screws of the old gasket. Use the driver to take off the screws. Make sure you don't lose the screws.

Step 5: Ask your assistant to hold the door while you loosen up the screw that attaches the door on the surface corner at the upper part of the machine. While loosening the screws, let your assistant partly close the door to fold the old gasket. This will make it easier for the gasket to loosen up. Once you have loosened it up, slowly take off the old gasket.

Step 6: Now install the new gasket. Thought about push the pliant gasket under the metal retainer of the fridge. While you are pushing the gasket, you might want to tighten the screws.

Step 7: Close the door to test the relationship of the new gasket. It should not have any gaps. If there are gaps, it means a part of the external cover of the refrigerator has been warped. You can try straightening it again.

Step 8: To make sure that air will not leak outside, place Led flashlight inside and turn it on. Close the door and check the side of the door for any leaks.

Refrigerator Gasket change Tips And Procedures

french door refrigerator black french door refrigerator side by side